Become part of the ProFermer Tools network and add a solid service to your portfolio

ProFermer Tools - optimization of agricultural and special machinery engines with saving factory settings

What do we offer

Power optimization without chip tuning up to 30%
Reduce fuel consumption by up to 20% without loss of power
Disabling the EGR (AGR) valve
Downgrading TIER 4 to TIER 2 (DeTIER procedure)
Work in the ProFermerTools dealer network
Disabling AdBlue and DPF particulate filter
Optimization of agricultural engines and special equipment of different brands
Programming of ECU

What makes the performance better

By optimizing the injection parameters, cooling, turbine operation, etc., we achieve more torque, the engine gets more power and runs at lower rpm, with greater efficiency and saving fuel.

At the same time, we analyze the parameters of such elements and blocks

Injectors
and injection system incl. HPCR (common rail)
Turbine
and peripherals in different operating modes
Supply system
and filtration
Cooling system
restrictive indicators
Limits
set by the manufacturer
Other elements
that affect power and consumption
We analyze the software and at the same time take into account all the restrictions and configurations, that the manufacturer has provided, the regional and constructive features of the machine.

Recently completed work

Manufacturer, model
Power
Fuel consumption
Disabled
Manufacturer, model
John Deere 8370R
Power
+15% (+60 hp)
Fuel consumption
-8 %
Disabled
-
Manufacturer, model
John Deere 8345R
Power
-
Fuel consumption
-
Disabled
AdBlue, EGR, DPF, VGT
Manufacturer, model
John Deere 8430
Power
+20% (70 hp)
Fuel consumption
-5 %
Disabled
-
Manufacturer, model
Fendt 936 Vario Profi Plus
Power
-
Fuel consumption
-15 %
Disabled
-
Manufacturer, model
John Deere 6195M
Power
+25% (50 hp)
Fuel consumption
-3%
Disabled
AdBlue, EGR, DPF
Manufacturer, model
Case Puma CVX 175
Power
+10% (20 hp)
Fuel consumption
-10 %
Disabled
-
Manufacturer, model
John Deere S670
Power
+20% (40 ph)
Fuel consumption
-7%
Disabled
-
Manufacturer, model
Claas Jaguar 890
Power
+10% (55 ph)
Fuel consumption
-5 %
Disabled
-
Manufacturer, model
John Deere 4730i
Power
-
Fuel consumption
-12 %
Disabled
-
Manufacturer, model
New Holland T7.270
Power
+25% (+70 ph)
Fuel consumption
-3%
Disabled
-
Manufacturer, model
Versatile 2375 (Cummins)
Power
+20% (75 ph)
Fuel consumption
-7 %
Disabled
-

Is there a list of machinery with models and percentages of possible power increases?

No. It contradicts the individual approach. In fact, the exact optimization potential can only be determined after reading the parameters of the machine. Why?

01
Same model, different software
Not only the configuration but also the software can have significant differences. Some machines, due to their region or configuration, receive the maximum possible settings already from the factory, and some, on the opposite, work with limited parameters.
02
We are honest with the client
Rarely are there situations in which power optimization is possible within very limited ranges. In such cases, an increase in power can only be detrimental - we say so in advance and exceed the limits only at the request of the machine owner.
03
What does your customer want?
Perhaps your customer needs and it is enough to increase the power by only 10%, instead of a possible 30%. Some make finer adjustments for heavy agro operations, others for light field work, and some want to be more economical than transport work.

Earn with ProFermer Tools

Leave an request and we will contact you to get familiar with you and talk about the details

Why ProFermer Tools?

German technology
These technologies are developed according to German standards, which guarantees you high quality and results.
Quality assurance
All work is carried out individually and according to the schedule with the preservation of the factory software
Over 10 years of experience
Over 10 years of work, we have removed all the mistakes and problems, brought the process to perfection, now the technology is the benchmark
Individual approach
Each machine is individual: equipment, software version, operating conditions, region. Our task is to precisely determine the optimization potential for each individual machine - this is the basis.
We keep the factory software
The machine works without external chips, harmoniously and with full compatibility. There are no hardware conflicts, and if errors appear, they are reported directly to the ECU.
The largest database
The network around the world performs daily optimizations and adds to our database. We accumulate results, collect data for comparison, and study a large number of different firmware versions.

Most competitors work with increasing power by increasing the pressure on the injectors and do it programmatically or using a tuning box

We are working with machine software , analyzing the full picture of opportunities and find the optimal result for each individual machine

ECU
Factory software optimization
All units work harmoniously and with full compatibility with controls.
ECU
Chip tuning
The chip "distorts" the actual data, leading to conflicts between units

What are the risks and guarantees?

We have been perfecting different types of agricultural and special equipment for more than 10 years and have collected a large statistical database, which we replenish successfully and daily.

01
Technical condition
We are working with machines that has a working hours. One engine has 500 m.p.h., another has more than 10,000 m.p.h. behind it. We advise the customer to make sure that the machine is in good working condition before optimization and, if necessary, to correct any malfunctions.
02
Not enough power
If the customer is not satisfied with the result of power or flow optimization, we bring the parameters in small steps to the desired result. When reaching and exceeding the limits we warn about possible risks.
03
Restoring the software
If your machine gets a software update, our firmware will not be lost. We store all software versions and restore upgraded settings for free. We also have the ability to restore factory settings

Earn with ProFermer Tools

Leave an request and we will contact you to get familiar with you and talk about the details

How is the optimization process going?

01
Project creation
This step includes preparing and planning the project,. collecting data about the machines, entering a target date, and confirming all participants.
02
Reading
Reading using special equipment, integrated protection against frequency interference, using special cables for different brands and series.
03
Sending a file
Sending the file through the portal to the appropriate engineer automatically. The project archives all files and manages the project
04
Order fulfillment
With timely scheduling, the process takes from 5 to 45 minutes. Average experience of engineers with tuning and software development for agricultural and special equipment >30 years.
05
Archiving
The implemented settings are saved on the server and get into the general database. There is also an archive of optimization options for each project separately.
06
Technique Update
After downloading - launching the machine, field or bench tests, collecting feedback.

A number of advantages that differ us from our competitors and highlight your benefits

01
DeTIER + Optimization
Deactivating AdBlue, EGR, DPF with factory settings is not an easy task in itself and not all services will do it. We can do both DeTIER and optimization, and if the customer wants both at the same time.
02
Work in the dealer network
ProFermer.com - is a multifunctional platform with the integrated ProFermer Tools service. Requests from the Store module we pass on to dealers in the regions or by the relevant specialist.
03
Portal with CRM system
Dealers and sub-dealers run projects on the portal. ProFermer.com with an integrated CRM system, service guide and chat with the administrator. CRM allows you to conduct other projects: sales, offers, orders, and more.
04
Directory
We collect practice questions from the dealer network and customers, and at ProFermer.com we form and continually update a guide with answers to them. Topics: technical, sales, special cases.
05
Chat with network members
Live chat for ProFermer Tools with service technicians from different regions allows you to exchange experiences and opinions. Announcements, news, general questions - it's all here. One person asks a question and everyone gets an answer.
06
All-round support
Onboarding of new colleagues and dealers, training, assistance in working with the client, online conferences on various topics with the network management and its members.

What do you get by selling ProFermer Tools services

Easy start
Acquisition of equipment is possible according to different concepts. The terms of cooperation should be clarified with the administrator.
High margin
In different regions and under different conditions, you can count on a margin of 50% to 100%. At the same time the time costs are minimal.
Expand your portfolio
Monetizing your client base with an additional service in your portfolio means new opportunities and profits from after sales.

FAQ

Earn with ProFermer Tools

Leave an request and we will contact you to get familiar with you and talk about the details