We optimize the power of agricultural and special equipment up to 30% with fuel savings up to 20%
We optimize the operation parameters of machines with keeping the original firmware
+25% power
Without chip tuning
-20% fuel consumption
What do we offer
Power optimization without chip tuning up to 30%
Reduce fuel consumption by up to 20% without loss of power
Disabling the EGR (AGR) valve
Downgrading TIER 4 to TIER 2 (DeTIER procedure)
Work in the ProFermerTools dealer network
Disabling AdBlue and DPF particulate filter
Optimization of agricultural engines and special equipment of different brands
Programming of ECU
What makes the performance better
By optimizing the injection parameters, cooling, turbine operation, etc., we achieve more torque, the engine gets more power and runs at lower rpm, with greater efficiency and saving fuel.
At the same time, we analyze the parameters of such elements and blocks
Injectors
and injection system incl. HPCR (common rail)
Turbine
and peripherals in different operating modes
Supply system
and filtration
Cooling system
restrictive indicators
Limits
set by the manufacturer
Other elements
that affect power and consumption
We analyze the software and at the same time take into account all the restrictions and configurations, that the manufacturer has provided, the regional and constructive features of the machine.
Observing the limitations set by the manufacturer, which does not reduce the service life
01
Analyzing limits
We analyze in detail the limits for key components, including cooling parameters, fuel system performance, and much more - all individually for each machine.
02
We compare
We compare similar machines according to the initial configuration parameters in order to provide for possible deviations, taking into account the optimizations made in the past.
03
We keep the factory software
The factory software is retained. The machine continues to work without conflicts and shows optimized efficiency.
Reach the full potential of your machine!
Leave a request and our specialist will provide you with a free consultation.
What gives optimization power and fuel consumption
Longer service life
Optimization achieves a more gentle motor operation mode
Noise reduction
The machine runs quieter because of the reduced amount of vibration
Speed and consumption
Improving speed performance and reducing fuel consumption
Up to 10% reduction in operating time
When working with the same units, the running speed increases, additionally opening up the possibility of working with wider units
Fuel economy from 5% to 20%
Maintaining the original power rating at the same level can achieve fuel savings of up to 20%
What opportunities appear after optimization
Moreworking width
Moreperformancewhole machine up to +30%
Using morelarge mountedequipment
Moretillageworks
Deeperefficientharvesting
Is there a list of machinery with models and percentages of possible power increases?
No. It contradicts the individual approach. In fact, the exact optimization potential can only be determined after reading the parameters of the machine. Why?
01
Same model, different software
Not only the configuration but also the software can have significant differences. Some machines, due to their region or configuration, receive the maximum possible settings already from the factory, and some, on the opposite, work with limited parameters.
02
We are honest with the client
Rarely are there situations in which power optimization is possible within very limited ranges. In such cases, an increase in power can only be detrimental - we say so in advance and exceed the limits only at the request of the machine owner.
03
And what exactly do you want?
Perhaps your customer needs and it is enough to increase the power by only 10%, instead of a possible 30%. Some make finer adjustments for heavy agro operations, others for light field work, and some want to be more economical than transport work.
Recently completed work
Manufacturer, model
Power
Fuel consumption
Disabled
Manufacturer, model
John Deere 8370R
Power
+15% (+60 hp)
Fuel consumption
-8%
Disabled
-
Manufacturer, model
John Deere 8345R
Power
-
Fuel consumption
-
Disabled
AdBlue, EGR, DPF, VGT
Manufacturer, model
John Deere 8430
Power
+20% (70 hp)
Fuel consumption
-5%
Disabled
-
Manufacturer, model
Fendt 936 Vario Profi Plus
Power
-
Fuel consumption
-15%
Disabled
-
Manufacturer, model
John Deere 6195M
Power
+25% (50 hp)
Fuel consumption
-3%
Disabled
AdBlue, EGR, DPF
Manufacturer, model
Case Puma CVX 175
Power
+10% (20 hp)
Fuel consumption
-ten %
Disabled
-
Manufacturer, model
John Deere S670
Power
+20% (40 ph)
Fuel consumption
-7%
Disabled
-
Manufacturer, model
Claas Jaguar 890
Power
+10% (55 ph)
Fuel consumption
-5 %
Disabled
-
Manufacturer, model
John Deere 4730i
Power
-
Fuel consumption
-12 %
Disabled
-
Manufacturer, model
New Holland T7.270
Power
+25% (+70 ph)
Fuel consumption
-3%
Disabled
-
Manufacturer, model
Versatile 2375 (Cummins)
Power
+20% (75 ph)
Fuel consumption
-7 %
Disabled
-
Most competitors work increasing power by increasing injector pressure and do it programmatically or using a tuning box
We are working with machine software , analyzing the full picture of opportunities and находим оптимальный результат для каждой отдельно взятой единицы техники
ECU
Factory software optimization
All units work harmoniously and with full compatibility with controls.
ECU
Chip tuning
The chip "distorts" the actual data, leading to conflicts between units
Why ProFermer Tools?
German technology
These technologies are developed according to German standards, which guarantees you high quality and results.
Quality assurance
All work is carried out individually and according to the schedule with the preservation of the factory software
Over 10 years of experience
Over 10 years of work, we have removed all the mistakes and problems, brought the process to perfection, now the technology is the benchmark
Individual approach
Each machine is individual: equipment, software version, operating conditions, region. Our task is to precisely determine the optimization potential for each individual machine - this is the basis.
We keep the factory software
The machine works without external chips, harmoniously and with full compatibility. There are no hardware conflicts, and if errors appear, they are reported directly to the ECU.
The largest database
The network around the world performs daily optimizations and adds to our database. We accumulate results, collect data for comparison, and study a large number of different firmware versions.
Your machinery can and should work more efficiently!
Leave a request and our specialist will provide you with a free consultation.
How is the optimization process going?
01
Project creation
This step includes preparing and planning the project,. collecting data about the machines, entering a target date, and confirming all participants.
02
Reading
Reading using special equipment, integrated protection against frequency interference, using special cables for different brands and series.
03
Sending a file
Sending the file through the portal to the appropriate engineer automatically. The project archives all files and manages the project
04
Order fulfillment
With timely scheduling, the process takes from 5 to 45 minutes. Average experience of engineers with tuning and software development for agricultural and special equipment >30 years.
05
Archiving
The implemented settings are saved on the server and get into the general database. There is also an archive of optimization options for each project separately.
06
Technique Update
After downloading - launching the machine, field or bench tests, collecting feedback.
FAQ
For a free consultation with a specialist
1
Leave a request
2
Set aside time for a consultation